Resealing a bathroom should not take any professional skill or special tools. You can make professional-looking jobs in as little as 2 hours, if you use the right approach.
What You’ll Need:
Silicone sealant and gun
Utility knife or debonding implement
Masking tape
Cleaning supplies
Smoothing tool (or your finger)
Part 1: Tear Down Old Sealant (30 mins)
Cut along these edges on both sides using a craft knife. Peel off the old one and then scrap any residue. Use methylated spirits to clean the area well so as not to contaminate with soap scum and mould.
Part 2: Prepare the Surface (15 minutes)
And make sure the section is really dry. First measure 10mm along both the big edges where you will apply, now here put masking tape on that line and make sure to make a gap with your desired bead. For Bathroom Sealant, consider www.ct1.com/product_application/sealing-your-shower-tray-with-bt1-bathroom-sealant
Part 3: Apply New Grout (30 minutes)
Use a pair of scissors to snip the tube at 45 degrees. Keep a firm pressure on the trigger and slide down the beam. Work quickly but don’t rush.
Part 4: Sand and blends tops (45 minutes)
Smooth out with a smoothing tool and wet finger Take off your masking tape while the sealant is still wet. Wait 15 minutes before using the bathroom.
Pro Tips:
Opt for a damp-proof sealant in wet areas.
Divide sections for larger joints.
Have a wet towel ready for mistakes.
The above routine is even faster, with practice. It will give your bathroom a professional appearance and make the new caulk last for many years.
